FRONT SEAT SIDE AIRBAG ASSEMBLY ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

CAUTION:

Be sure to correctly follow the removal and installation procedures for the front seat airbag assemblies.

PROCEDURE

  1. INSPECT FRONT SEAT AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)

    1. Perform a diagnostic system check.

      Click here

    2. Visually check for defects with the front seat airbag assemblies installed to the vehicle.

      Tip:

      The defects are as follows:

      • Cracks on the front seat airbag assemblies

      • Dents on the front seat airbag assemblies

      • Chips on the front seat airbag assemblies

      OK

      No defects are found.

      If any defects are found, replace the front seat airbag assembly with a new one.

  2. INSPECT FRONT SEAT AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)

    1. Perform a diagnostic system check.

      Click here

    2. Visually check for defects with the front seat airbag assemblies removed from the vehicle.

      Tip:

      The defects are as follows:

      • Marks from being dropped

      • Deformation of the installation surface of the front seat airbag assemblies

      • Cracks or other damage to the wire harness or connector

      OK

      No defects are found.

      If any defects are found, replace the front seat airbag assembly with a new one.