STEERING COLUMN ASSEMBLY INSPECTION

PROCEDURE

  1. INSPECT STEERING COLUMN

    1. C163149E05

      Check that the 2 bushings are securely installed to the steering column assembly.

      Table 1. Text in Illustration

      *1

      Collar

      *2

      Bushing
      Tip:

      If the bushings are missing or damaged, replace the steering column assembly with a new one.

    2. Inspect the capsules.

      1. U123337E02

        Check that the 2 capsules are securely installed to the steering column assembly as shown in the illustration.

        Standard dimension (A)

        2 mm (0.0787 in.)

        Table 2. Text in Illustration

        *1

        Capsule

        If the capsules are not positioned as specified, replace the steering column assembly with a new one.

      2. Check the 2 capsules for deformation and damage.

        If either of the capsules is deformed, loose, missing or damaged, replace the steering column assembly with a new one.

  2. INSPECT PRELOAD

    1. Secure the steering column assembly in a vise.

    2. C149897E03

      Using SST, turn the main shaft and measure the preload.

      09616-00011

      Standard preload

      1.2 to 1.95 N*m (12.0 to 19.9 kgf*cm, 11.0 to 17.2 in.*lbf)

      If the preload is not as specified, replace the steering column assembly.

  3. INSPECT STEERING LOCK OPERATION (w/o Entry and Start System)

    1. U122654

      Check that the steering lock mechanism is activated when the key is removed.

    2. U122655E01

      Check that the steering lock mechanism is deactivated when the key is inserted and turned to the ACC position.

      Tip:

      If there is any abnormality, replace the ignition switch lock cylinder assembly or steering column upper bracket assembly.