ROCKER OUTER PANEL(for Double Cab) CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)

A01KXZD

  1. REMOVAL

    Symbol Meaning
    A01KY10 Remove Weld Points
    A01KXQ6 Cut and Join Location
    A01KXTT Cut Location for Supply Parts
    A01KXPSC01
    *a 200 mm (7.87 in.) - -
    A01KXSQ
  2. INSTALLATION

    Symbol Meaning
    A01KXP7 Plug Weld
    A01KY6V Butt Weld

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

      A01KY1SC01
      *1 FRONT BODY PILLAR UPPER OUTER - -
    3. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.