INITIALIZATION
Note
Before replacing the ECM, refer to Service Bulletin (for Immobiliser System).
Perform Registration (VIN registration or frame number registration) when replacing the ECM.
Make sure to perform Reset Memory (A/T initialization), when replacing the automatic transmission assembly, ECM or engine assembly.
When the cable is disconnected from the negative (-) battery terminal, initialize the following system(s) after the cable is reconnected.
| System Name | See Procedure |
|---|---|
| LKA/LDA System | |
| Pre-collision system | |
| Parking support brake system | |
| Lighting system (EXT) | |
| Variable gear ratio steering system | |
| Stop and Start System | |
| Parking Assist Monitor System | |
| Panoramic View Monitor System | |
| Rear door sunshade system | |
| Power trunk lid system | |
| Adaptive high beam system |
WHEN USING GTS
CAUTION:
Observe the following items for safety reasons:
Before using the GTS, read the instruction manual.
Prevent the GTS cable from being caught on the pedals, shift lever or steering wheel when driving with the GTS connected to the vehicle.
When driving the vehicle for testing purposes using the GTS, 2 persons are required. One to drive the vehicle, and another to operate the GTS.