GENERATOR REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE REAR ENGINE UNDER COVER RH

    Click here

  4. REMOVE FAN AND GENERATOR V BELT

    Click here

  5. REMOVE FRONT NO. 2 EXHAUST PIPE SUB-ASSEMBLY

    Click here

  6. REMOVE GENERATOR ASSEMBLY


    1. B008HFO

      Disconnect the crankshaft position sensor connector and detach the 2 clamps.

    2. Remove the terminal cap.

    3. Remove the nut and disconnect the wire harness from the terminal B.

    4. Disconnect the generator wire and generator connector.

    5. B008I7Y

      Remove the 2 bolts and generator assembly.

    6. B008HPW

      Remove the 2 bolts and 2 wire harness brackets.