WATER PUMP INSTALLATION

PROCEDURE

  1. INSTALL ENGINE WATER PUMP ASSEMBLY

    1. A251393

      Apply seal packing in a continuous line as shown in the illustration.

      Standard seal diameter

      2.0 to 2.5 mm (0.0787 to 0.0984 in.)

      Note:

      • Remove any oil from the contact surface.

      • Install the engine water pump assembly within 3 minutes of applying seal packing.

      • Do not start the engine for at least 4 hours after installation.

    2. Install the engine water pump assembly with the 5 bolts.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

  2. INSTALL GENERATOR ASSEMBLY

    Click here

  3. ADD ENGINE COOLANT

    Click here

  4. INSPECT FOR COOLANT LEAK

    Click here