IGNITION SWITCH INSPECTION

PROCEDURE

  1. INSPECT IGNITION SWITCH ASSEMBLY

    1. G035048E41

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Switch Condition

      Specified Condition

      -

      LOCK

      10 kΩ or higher

      2 (AM1) - 3 (ACC)

      ACC

      Below 1 Ω

      2 (AM1) - 3 (ACC)

      2 (AM1) - 4 (IG1)

      6 (IG2) - 7 (AM2)

      ON

      Below 1 Ω

      1 (ST1) - 2 (AM1)

      1 (ST1) - 4 (IG1)

      6 (IG2) - 7 (AM2)

      6 (IG2) - 8 (ST2)

      START

      Below 1 Ω
      Table 1. Text in Illustration

      *1

      Component without harness connected

      (Ignition Switch)

      If the result is not as specified, replace the ignition switch assembly.