STEERING KNUCKLE REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE

  1. REMOVE FRONT AXLE ASSEMBLY

    Click hereClick here

  2. REMOVE SKID CONTROL SENSOR COVER

    Click hereClick here

  3. REMOVE FRONT AXLE HUB SUB-ASSEMBLY

    Click hereClick here

  4. REMOVE FRONT STEERING KNUCKLE HEAT INSULATOR

    Click hereClick here

  5. REMOVE FRONT AXLE HUB HOLE SNAP RING

    Click hereClick here

  6. REMOVE STEERING KNUCKLE

    1. C302398N01

      Using SST and a press, remove the front axle hub bearing from the steering knuckle.

      09950-60010

      09951-00470

      09950-70010

      09951-07100

      Note:

      Position the steering knuckle horizontally.