REAR MULTI OPERATION PANEL SYSTEM TERMINALS OF ECU


  1. CHECK REAR POWER SEAT SWITCH(REAR MULTI OPERATION PANEL)

    B005R8SN02
    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    A-12 (B) - A-1 (E) # - # Power source Always 11 to 14 V
    A-6 (ACC) - A-1 (E) # - # Power source (ACC) Engine switch on (ACC) 11 to 14 V
    A-1 (E) - Body ground # - Body ground Ground Always Below 1 Ω
    A-4 (ECU) - A-1 (E) # - # Rear window sunshade operation signal

    Measure under any of the following conditions:


    • Turn the rear window sunshade switch ON within 65 seconds of turning the engine switch off

    • Turn engine switch on (IG) and rear window sunshade switch ON after 65 seconds have elapsed after turning the engine switch off

    		 Below 2.5 V

    Measure under any of the following conditions:


    • Turn the rear window sunshade switch OFF within 65 seconds of turning the engine switch off

    • Turn engine switch on (IG) and rear window sunshade switch OFF after 65 seconds have elapsed after turning the engine switch off

    		 4.6 to 5.3 V
    A-5 (SW) - A-1 (E) # - # Rear seat armrest open/close status signal Rear seat armrest is closed Below 1 V
    Rear seat armrest is open 2.3 to 4.3 V
    A-3 (LIN) - Body ground # - Body ground LIN communication signal - -
    A-7 (TX+) # AVC-LAN communication signal - -
    A-8 (TX-) # AVC-LAN communication signal - -
    A-9 (CANH) # CAN communication signal - -
    A-10 (CANL) # CAN communication signal - -