REAR COMBINATION LIGHT ASSEMBLY(except Sedan) INSPECTION

PROCEDURE

  1. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH

    1. E259579C03

      *a

      Component without harness connected

      (Rear Combination Light Assembly LH)

      Apply battery voltage to the rear combination light assembly LH and check that the lights come on.

      OK

      Condition

      Specified Condition

      Battery positive (+) → Terminal 1 (B)

      Battery negative (-) → Terminal 3 (E)

      The stop light comes on

      Battery positive (+) → Terminal 4 (B)

      Battery negative (-) → Terminal 3 (E)

      The turn signal light comes on

      If the result is not as specified, replace the bulb or rear combination light socket and wire sub-assembly LH.

    2. Apply battery voltage to the rear combination light assembly LH and check that the lights come on.

      OK

      Condition

      Specified Condition

      Battery positive (+) → Terminal 2 (TL)

      Battery negative (-) → Terminal 3 (E)

      The taillight comes on

      If the result is not as specified, replace the rear combination light lens and body or rear combination light socket and wire sub-assembly LH.

  2. INSPECT REAR COMBINATION LIGHT ASSEMBLY RH

    1. E259579C05

      *a

      Component without harness connected

      (Rear Combination Light Assembly RH)

      Apply battery voltage to the rear combination light assembly RH and check that the lights come on.

      OK

      Condition

      Specified Condition

      Battery positive (+) → Terminal 1 (B)

      Battery negative (-) → Terminal 3 (E)

      The stop light comes on

      Battery positive (+) → Terminal 4 (B)

      Battery negative (-) → Terminal 3 (E)

      The turn signal light comes on

      If the result is not as specified, replace the bulb or rear combination light socket and wire sub-assembly RH.

    2. Apply battery voltage to the rear combination light assembly RH and check that the lights come on.

      OK

      Condition

      Specified Condition

      Battery positive (+) → Terminal 2 (TL)

      Battery negative (-) → Terminal 3 (E)

      The taillight comes on

      If the result is not as specified, replace the rear combination light lens and body or rear combination light socket and wire sub-assembly RH.