FUEL PRESSURE PULSATION DAMPER INSTALLATION

PROCEDURE

1. INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY

   
   

   1. Apply a light coat of spindle oil or gasoline to a new O-ring and install the O-ring to the fuel pressure pulsation damper assembly.

   2. Install the fuel pressure pulsation damper assembly to the fuel delivery pipe sub-assembly.

   3. Install the fuel pressure regulator holder to the fuel pressure pulsation damper assembly.

2. INSTALL INTAKE AIR SURGE TANK

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

4. INSPECT FOR FUEL LEAK

   Click here