ELECTRONICALLY CONTROLLED BRAKE SYSTEM, Diagnostic DTC:C1419, C1435

DTC Code DTC Name
C1419 Acceleration Sensor Internal Circuit
C1435 Yaw Rate Sensor Internal Circuit

DESCRIPTION

These DTCs are stored when the skid control ECU (brake actuator assembly) receives an internal malfunction signal from the acceleration sensor (yaw rate sensor).

DTC No. Detection Item DTC Detection Condition Trouble Area Note
C1419 Acceleration Sensor Internal Circuit A data malfunction signal is received from an acceleration sensor. Acceleration sensor (yaw rate sensor) -
C1435 Yaw Rate Sensor Internal Circuit A data malfunction signal is received from a yaw rate sensor. Yaw rate sensor -

CAUTION / NOTICE / HINT

Note

When replacing the acceleration sensor (yaw rate sensor), perform zero point calibration and store system information.

Click here

PROCEDURE


  1. REPLACE YAW RATE SENSOR


    1. Replace the acceleration sensor (yaw rate sensor).

      Click here

      Note

      Check the acceleration sensor (yaw rate sensor) signal after replacement.

      Click here

      Result
      Proceed to
      NEXT

    NEXT

    END