STEERING ANGLE SENSOR INSTALLATION

PROCEDURE

1. INSTALL SPIRAL CABLE SUB-ASSEMBLY

   Click hereClick here

   Note:

   • Do not replace the spiral cable sub-assembly with the battery connected and the ignition switch ON.

   • Do not rotate the spiral cable sub-assembly without the steering wheel assembly with the battery connected and the ignition switch ON.

   • Ensure that the steering wheel assembly is installed and aligned straight when inspecting the steering sensor.

2. INSTALL UPPER NO. 2 STEERING COLUMN COVER

   Click here

3. INSTALL LOWER STEERING COLUMN COVER

   Click here

4. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

5. INSPECT AND ADJUST SPIRAL CABLE SUB-ASSEMBLY

   Click hereClick here

6. INSTALL STEERING WHEEL ASSEMBLY

   Click here