STARTER (for 2.7 kW Type) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    1. B007UJWE03

      Remove the nut and disconnect the transmission control cable assembly from the transmission control shaft lever assembly.

    2. Remove the clip and disconnect the transmission control cable assembly from the No. 1 transmission control cable bracket.

  3. REMOVE NO. 1 TRANSMISSION CONTROL CABLE BRACKET


    1. B007Q6F

      Remove the 2 bolts and the No. 1 transmission control cable bracket from the automatic transmission housing.

  4. REMOVE STARTER ASSEMBLY


    1. B007V15E01

      for Wide Body:

      Remove the bolt, then disconnect the ground cable.

    2. B007QWSE01

      Open the terminal cap.

    3. Remove the nut and disconnect the wire harness from terminal 30.

    4. Disconnect the terminal 50 connector from the starter.

    5. B007V7W

      for Automatic Transmission:

      Remove the bolt and 2 nuts, then remove the starter.

    6. B007VMZ

      for Manual Transmission:

      Remove the bolt and nut, then remove the starter.