DOOR CONTROL RECEIVER INSTALLATION

PROCEDURE


  1. INSTALL ELECTRICAL KEY AND TPMS RECEIVER ASSEMBLY (w/ Tire Pressure Warning System)


    1. Connect the 2 connectors.

    2. B006BWBC01
      B006AHR Nut
      B006EC9 Connector

      Install the electrical key and TPMS receiver assembly with the nut.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      Note


      • Do not reuse an electrical key and TPMS receiver assembly which has been subjected to an impact or dropped.

      • B006G7H

        If the removed nut is the same shape as that shown in the illustration, replace it the supplied replacement part.

  2. INSTALL SMART DOOR CONTROL RECEIVER ASSEMBLY (w/o Tire Pressure Warning System)


    1. Connect the connector.

    2. B006BWBC01
      B006AHR Nut
      B006EC9 Connector

      Install the smart door control receiver assembly with the nut.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      Note


      • Do not reuse a smart door control receiver assembly which has been subjected to an impact or dropped.

      • B006G7H

        If the removed nut is the same shape as that shown in the illustration, replace it the supplied replacement part.

  3. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH


    1. B006BNSC01
      B006DHE Install in this Direction
      B006AHR Clip
      B006EC9 Grommet

      Install the luggage compartment trim cover assembly RH with the 2 clips.

    2. Install the grommet.

    3. B006BY5C01
      B006DHE Install in this Direction
      B006EC9 Push

      Push the lever in the direction of the arrow shown in the illustration and install the rope hook.

  4. INSTALL SIDE TRIM BOX


    1. B006CG4

      Attach the guide and claw to install the side trim box.

  5. INSTALL REAR FLOOR FINISH PLATE

    Click here

  6. INSTALL ROPE HOOK ASSEMBLY

    Click here

  7. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

    Click here

  8. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

  9. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear Air Conditioning System)

    Click here

  10. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/ Rear Air Conditioning System)

    Tech Tips

    Use the same procedure described for the front luggage compartment trim cover (w/o Rear Air Conditioning System).

  11. INSTALL INNER LOWER LUGGAGE COMPARTMENT TRIM COVER

    Click here

  12. INSTALL TOOL BOX

    Click here

  13. INSTALL LUGGAGE COMPARTMENT TRIM BOX (w/o Air Suspension)

    Click here

  14. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

  15. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH

    Click here

  16. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  17. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  18. LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

  19. REGISTER TRANSMITTER ID (w/ Tire Pressure Warning System)

    Click here

  20. INSPECT TIRE PRESSURE WARNING SYSTEM (w/ Tire Pressure Warning System)

    Click here

  21. PERFORM INITIALIZATION (w/ Tire Pressure Warning System)

    Click here