HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD) REMOVAL


  1. REMOVE RADIATOR GRILLE


    1. A01DYIBE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the radiator grille.

    2. Remove the 2 clips and 2 screws.

    3. A01DY0N

      Detach the 6 claws and remove the radiator grille.

  2. REMOVE HOOD LOCK ASSEMBLY


    1. A01DWGQ

      Remove the 3 bolts.

    2. A01E0BB

      Disconnect the hood lock control cable and remove the hood lock.

  3. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. A01DV98

      Detach the 3 claws.

    2. Disconnect the hood lock control cable and remove the hood lock control lever.

  4. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY


    1. A01DYAKE01
      Text in Illustration
      *1 String

      Tie a string to the end of the hood lock control cable assembly as shown in the illustration.

      Tech Tips

      Use a length of string long enough to pass through the engine compartment.

    2. Detach each clamp and the grommet, and then pull out the hood lock control cable from the vehicle body.

    3. Untie the string from the hood lock control cable.

      A01E1QBE01
      Text in Illustration
      *1 Hood Lock Control Cable *2 Grommet