SFI SYSTEM


  1. CONSTRUCTION


    1. A fuel pressure sensor is installed to both the fuel delivery pipe (for direct injection) and the fuel delivery pipe (for port injection).

    2. The fuel pressure sensor consists of a semiconductor which utilizes the characteristics of a silicon chip that changes its electrical resistance when pressure is applied to it. The sensor converts the fuel pressure into an electrical signal, and sends it to the ECM in an amplified form.

      Figure 1. For High Pressure

      A01GGC9E02
      *1 Sensor Output Characteristics
      *2 Output Voltage
      *3 Fuel Pressure
      *4 (MPa)

      Figure 2. For Low Pressure

      A01GGM4E02
      *1 Sensor Output Characteristics
      *2 Output Voltage
      *3 Fuel Pressure
      *4 (kPa)