PARK ASSIST / MONITORING SERVICE DATA

Table 1. ULTRASONIC SENSOR
Tester Connection	Condition	Specified Condition
1 (BI) - 5 (EI) 1 (BI) - 2 (BO)	Always	Below 1 Ω
3 (SI) - 4 (SO) 5 (EI) - 6 (EO)	Always	10 kΩ or higher

Table 2. CLEARANCE SONAR MAIN SWITCH
Tester Connection	Condition	Specified Condition
1 (ECU) - 9 (LAPB)	Clearance sonar main switch on	Below 1 Ω
1 (ECU) - 9 (LAPB)	Clearance sonar main switch off	10 kΩ or higher

Table 3. BLIND SPOT MONITOR MAIN SWITCH (for LHD)
Tester Connection	Condition	Specified Condition
11 (B) - 8 (D)	Blind spot monitormain switch assembly on (notprotruding)	Below 1 Ω
11 (B) - 8 (D)	Blind spot monitormain switch assembly off (protruding)	10 kΩ or higher

Table 4. BLIND SPOT MONITOR MAIN SWITCH (for RHD)
Tester Connection	Condition	Specified Condition
8 (D) - 9 (LAPB)	Blind spot monitormain switch assembly on (notprotruding)	Below 1 Ω
8 (D) - 9 (LAPB)	Blind spot monitormain switch assembly off (protruding)	10 kΩ or higher