FUEL LID LOCK CONTROL CABLE ASSEMBLY(for Sedan RHD) INSTALLATION

PROCEDURE

  1. INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

    1. Engage the 10 clamps to install the fuel lid lock control cable sub-assembly.

    2. Engage the 2 claws to connect the fuel lid lock control cable sub-assembly.

    3. Return the floor carpet to the original position.

    4. Install the clip.

    5. Engage the 4 clamps.

  2. INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

  3. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH

  4. INSTALL REAR FLOOR FINISH PLATE

  5. INSTALL REAR SEAT SIDE GARNISH LH

  6. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY

  7. INSTALL CENTER PILLAR LOWER GARNISH LH

  8. CONNECT FRONT SEAT OUTER BELT ASSEMBLY LH

  9. INSTALL LAP BELT OUTER ANCHOR COVER (for LH Side)

  10. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

  11. INSTALL REAR DOOR SCUFF PLATE LH

  12. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

  13. INSTALL FRONT DOOR SCUFF PLATE LH

  14. INSTALL CENTER PILLAR LOWER GARNISH RH

    Tip:

    Use the same procedure as for the LH side.

  15. CONNECT FRONT SEAT OUTER BELT ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

  16. INSTALL LAP BELT OUTER ANCHOR COVER (for RH Side)

    Tip:

    Use the same procedure as for the LH side.

  17. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

  18. INSTALL REAR DOOR SCUFF PLATE RH

    Tip:

    Use the same procedure as for the LH side.

  19. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

  20. INSTALL FRONT DOOR SCUFF PLATE RH

    Tip:

    Use the same procedure as for the LH side.

  21. INSTALL REAR SEATBACK ASSEMBLY LH

  22. INSTALL FRONT SEAT ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

    Click here

  23. INSTALL FRONT SEAT ASSEMBLY LH

    Tip:

    Use the same procedure as for the RH side.