CHARGING SYSTEM FAIL-SAFE CHART

If any of the following DTCs are stored, the ECM enters fail-safe mode to allow the vehicle to be driven temporarily.

Table 1. w/ Stop and Start System

DTC No.

Fail-safe Operation

Fail-safe Deactivation Condition

P058A01

P16027B

P161A87

P162B87

Generator command is fixed.

Ignition switch is turned to ON after condition returns to normal.
Table 2. w/o Stop and Start System

DTC No.

Fail-safe Operation

Fail-safe Deactivation Condition

P161A87

Generator command is fixed.

Ignition switch is turned to ON after condition returns to normal.