CRANKSHAFT POSITION SENSOR INSPECTION

PROCEDURE

  1. INSPECT CRANKSHAFT POSITION SENSOR

    1. A208130E01

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 - 2

      Cold

      1630 to 2740 Ω

      Hot

      2065 to 3225 Ω
      Table 1. Text in Illustration

      *1

      Component without harness connected

      (Crankshaft Position Sensor)
      Tip:

      In the table above, the terms "Cold" and "Hot" refer to the temperature of the coils. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).

      If the result is not as specified, replace the sensor.