RADIO RECEIVER REMOVAL

PROCEDURE

  1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  2. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  3. REMOVE RADIO RECEIVER ASSEMBLY (for Radio Receiver Type)

    1. E294505

      Remove the 2 screws.

    2. E294506

      Pull the radio receiver assembly toward the rear of the vehicle and disengage the 4 clips.

    3. Disconnect each connector and remove the radio receiver assembly.

  4. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type)

    1. E294451

      Remove the 2 screws.

    2. E294452

      Pull the radio and display receiver assembly toward the rear of the vehicle and disengage the 4 clips.

    3. Disconnect each connector and remove the radio and display receiver assembly.