HEADLIGHT ASSEMBLY(for Halogen Headlight) INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart.

    Click here

PROCEDURE

  1. INSTALL HEADLIGHT ASSEMBLY LH

    1. Connect each connector.

    2. Set the headlight assembly LH in place.

    3. Install the bolt and 3 screws.

  2. INSTALL FRONT BUMPER COVER

    Click here

  3. ADJUST HEADLIGHT AIMING

    Click here

  4. ADJUST FOG LIGHT AIMING (w/ Fog Light)

    Click here