| Part tightened | N*m | kgf*cm | ft.*lbf | ||
|---|---|---|---|---|---|
| Oil pressure switch x Cylinder block | 15 | 153 | 11 | ||
| Oil filter x Oil filter union | 17.2 | 175 | 13 | ||
| Oil drain plug x No. 2 oil pan | 37.5 | 382 | 28 | ||
| Oil pump cover x Timing chain cover | 9.0 | 92 | 80 in.*lbf | ||
| Oil pump relief valve x Timing chain cover | 49 | 500 | 36 | ||
| Water pump x Timing chain cover | 13 | 133 | 10 | ||
| Timing gear case plug x Timing gear case | 16.6 | 169 | 12 | ||
| Timing chain cover x Cylinder block | Excluding the bolts labeled A and C, tighten the bolts and nuts in this order: Area 1, Area 2 and Area 3. | 21 | 214 | 15 | |
| Excluding the bolts labeled A, E and F, tighten the bolts and nuts in this order: Area 1, Area 3, Area 2. | for bolt C | 26 | 265 | 19 | |
| for bolt B, D and nut | 21 | 214 | 15 | ||
| Tighten the bolts labeled A in this order: Area 2 and Area 3. | 60 | 612 | 44 | ||
| Tighten the bolt labeled F. | 46 | 469 | 34 | ||
| Tighten the bolts labeled E in Area 4. | 21 | 214 | 15 | ||
| No. 1 oil pan x Cylinder block | 26 | 265 | 19 | ||
| Oil strainer x No. 1 oil pan | 20 | 204 | 15 | ||
| No 2 oil pan x No. 1 oil pan | 9.0 | 92 | 80 in.*lbf | ||
| Crank pulley bolt x Crankshaft | 260 | 2,651 | 192 | ||
| Camshaft position sensor x Cylinder head | 8.5 | 87 | 75 in.*lbf | ||
| Cylinder head cover x Cylinder head | 9.0 | 92 | 80 in.*lbf | ||
| No. 1 water by-pass pipe x Timing chain cover | 17.5 | 178 | 13 | ||
| No. 1 idler pulley x Timing chain cover | 43 | 438 | 32 | ||
| V-ribbed belt tensioner x Timing chain cover : for bolt 1 |
40 | 408 | 30 | ||
| V-ribbed belt tensioner x Timing chain cover : for bolt 2 |
21 | 214 | 15 | ||
| V-ribbed belt tensioner x Timing chain cover : for bolt 3 |
43 | 438 | 32 | ||
| Intake manifold x Cylinder head | 25 | 255 | 18 | ||