WIPER AND WASHER SYSTEM

OUTLINE

1. The windshield wiper motor assembly and wiper link assembly are mounted in a modular frame, reducing wiper operation sound and reducing variations in the wiping range.

2. Diffuser type washer nozzle sub-assemblies are provided under the engine hood to ensure a good appearance.

3. A rain sensing function is provided for the front wiper system. This function controls the wiping timing in accordance with the amount of rain detected when the front wiper switch is in the AUTO position.

4. A warning message display function, which shows a warning message on the combination meter assembly when the washer fluid is low, is provided on some models.

5. A graphite coating is applied to the surface of the wiper rubber, reducing inversion noise and wiper flutter while the wipers are operating.

6. A headlight cleaner system is provided on some models to allow optimal lighting effectiveness to be maintained.

7. The front wiper control system has the following functions:

   Function
   Mist function
   Front wiper intermittent interval adjustment function
   Washer-linked wiper with drip-prevention function
   Vehicle speed-sensing, adjustable interval function
   Vehicle speed switching function
   Smooth high/low speed switching control function
   Door open linked wiper suspend function
   Service position function
   Wiper system with rain sensing function
   Rain sensor sensitivity adjustment function
   Fail-safe function

PRECAUTION

1. Ignition Switch Expressions

   
   

   1. The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

      Expression	Ignition Switch (Position)	Engine Switch (Condition)
      Ignition Switch off	LOCK	Off (Lock)
      Ignition Switch ACC	ACC	On (ACC)
      Ignition Switch ON	ON	On (IG)
      Engine Start	START	On (Start)