DIFFERENTIAL OIL SEAL(for RH Side) REPLACEMENT

PROCEDURE

1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

   Click here

2. REMOVE TRANSFER ASSEMBLY

   Click hereClick here

3. REMOVE TRANSAXLE CASE OIL SEAL RH

   1. 

      *a	Protective Tape

      Outer:

      1. Using a screwdriver with its tip wrapped with protective tape, pry out the transaxle case oil seal RH.

         Note:

         Be careful not to damage the housing.

         Tip:

         Tape the screwdriver tip before use.

   2. 

      Inner:

      1. Using SST, tap out the transaxle case oil seal RH.

         09308-00010

         Note:

         Be careful not to damage the housing.

4. INSTALL TRANSAXLE CASE OIL SEAL RH

   1. 

      Inner:

      1. Coat the lip of a new transaxle case oil RH seal with MP grease.

      2. Using SST and a hammer, tap in the transaxle case oil seal RH.

         09950-60010

         09951-00410

         09950-70010

         09951-07200

         Standard depth

         21.5 to 22.5 mm (0.847 to 0.885 in.)

   2. 

      Outer:

      1. Coat the lip of a new transaxle case oil seal RH with MP grease.

      2. Using SST and a hammer, tap in the transaxle case oil seal RH.

         09649-17010

         09950-70010

         09951-07200

         Standard depth

         5.5 to 6.5 mm (0.217 to 0.255 in.)

         Note:

         Make sure that the transaxle oil seal RH is installed in the correct direction.

5. INSTALL TRANSFER ASSEMBLY

   Click hereClick here

6. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY

   Click here