HEADLIGHT ASSEMBLY(for Bulb Type Turn Signal Light) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL HEADLIGHT ASSEMBLY


    1. B008719C01
      *a Connector Lock Lever
      B00847Z Engage in this Direction

      Connect the connector and raise the connector lock lever to engage the claw and lock the connector as shown in the illustration.

    2. B00858WC01
      B00847Z Install in this Direction

      Engage the guide to temporarily install the headlight assembly as shown in the illustration.

    3. B0085FRC01
      *a Bolt
      *b Screw

      Install the headlight assembly with the bolt and 3 screws.

      Torque:
      Bolt
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

    4. Remove the protective tape.

  2. INSTALL FRONT BUMPER ASSEMBLY

    Click here

  3. PERFORM INITIALIZATION

    Click here

  4. ADJUST HEADLIGHT AIMING

    Click here