GLOW PLUG INSTALLATION

PROCEDURE

  1. INSTALL GLOW PLUG ASSEMBLY

    A316914E02

    1. Using SST, install the 4 glow plug assemblies.

      SST

      PZ4TB-04910-68

      18 N*m

      178 kgf*cm

      13 ft.*lbf

    2. Connect the 4 connectors to the glow plug assemblies.

  2. CONNECT ENGINE WIRE

    1. Using a T25 "TORX" socket wrench, connect the engine wire with the screw.

  3. INSTALL NO. 1 ENGINE COVER

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).