САЛЬНИК УДЛИНИТЕЛЯ КАРТЕРА МЕХАНИЧЕСКОЙ ТРАНСМИССИИ ЗАМЕНА

PROCEDURE

1. REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY

   
   

   • for TSAM Made:

     Click here

   • for TMT Made:

     Click here

   • for TMMIN Made:

     Click here

2. REMOVE MANUAL TRANSMISSION EXTENSION HOUSING OIL SEAL

   
   

   1. 

      Using SST, tap out the manual transmission extension housing oil seal.

      SST

      09308-00010

3. INSTALL MANUAL TRANSMISSION EXTENSION HOUSING OIL SEAL

   
   

   1. 

      Coat the lip of a new oil seal with MP grease.

   2. Using SST and hammer, tap in the manual transmission extension housing oil seal.

      SST

      09223-50010

      Standard Depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note

      Be careful not to damage the lip of the oil seal.

4. INSTALL PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY

   
   

   • for TSAM Made:

     Click here

   • for TMT Made:

     Click here

   • for TMMIN Made:

     Click here