RADIO ANTENNA HOLDER REMOVAL

PROCEDURE

  1. PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click hereClick hereClick here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick hereClick hereClick here

  3. REMOVE ROOF HEADLINING ASSEMBLY

    Click here

  4. REMOVE ROOF ANTENNA POLE SUB-ASSEMBLY

    Click here

  5. REMOVE WITH HOLDER ANTENNA ASSEMBLY

    1. B335974

      Disconnect the connector.

    2. Remove the nut.

    3. B208915

      Detach the 2 claws and remove the with holder antenna assembly.