ЖГУТ ЭЛЕКТРОПРОВОДКИ ТРАНСМИССИИ СНЯТИЕ


  1. DISCONNECT BATTERY NEGATIVE CABLE

  2. REMOVE TRANSMISSION OIL LEVEL GAUGE SUB-ASSEMBLY


    1. B007S6I

      Remove the transmission oil level gauge from the transmission oil filler tube.

  3. DRAIN AUTOMATIC TRANSMISSION FLUID


    1. B007VN0

      Remove the drain plug and gasket and drain the automatic transmission fluid.

    2. Install the drain plug with a new gasket.

      Torque:
      20 N*m  { 205 kgf*cm, 15 ft.*lbf }

  4. REMOVE TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY


    1. B007QRBE02

      Remove the oil filler tube with 2 bolts.

    2. Remove the O-ring from the oil filler tube.

  5. REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY


    1. B007OOH

      Uniformly loosen the 19 bolts and remove the transmission oil pan sub-assembly.

    2. B007V8XE01

      Using oil pan seal cutter, remove the transmission oil pan.

      Note


      • Be careful not to damage the oil pan and flange.

      • Do not incline the oil pan because of any fluid will remain in the oil pan.

    3. B007UG5E04

      Remove the 3 magnets from the transmission oil pan.

  6. REMOVE VALVE BODY OIL STRAINER ASSEMBLY


    1. B007P3IE04

      Remove the oil strainer assembly and 3 gaskets with 4 bolts.

  7. SEPARATE TRANSMISSION WIRE


    1. B007T4B

      Disconnect the temperature sensor and 4 transmission solenoid connectors from the transmission valve body.

  8. REMOVE TRANSMISSION WIRE


    1. B007PJ1

      Disconnect the transmission wire connector.

    2. Remove the bolt and pull out the transmission wire.

    3. B007P6LE01

      Remove the O-ring from the transmission wire.