FRONT DOOR COURTESY SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY


    1. Connect the connector.

    2. Remove the tape to prevent wire harness from falling wire harness.

    3. Using a T30 "TORX" socket wrench, install the front door courtesy light switch with a new "TORX" screw.

      Torque:
      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }
      B005SW4C01
      B006GBM Tape to prevent wire harness from falling B006DHE Install in this Direction
      B006AHR Connector B006EC9 "TORX" Screw