CLUTCH ACCUMULATOR (except 1GR-FE) INSTALLATION


  1. INSTALL CLUTCH ACCUMULATOR ASSEMBLY

    A01DZDLE04

    1. Install the clutch accumulator with the 2 nuts.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

    2. Using a union nut wrench, connect the 2 flexible tubes.

      Torque:
      15 N*m  { 153 kgf*cm, 11 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

  2. BLEED AIR FROM CLUTCH PIPE LINE

    Click here

  3. CHECK FOR CLUTCH FLUID LEAKAGE

  4. CHECK FOR FLUID LEVEL IN RESERVOIR

    Fluid
    Made Fluid
    for TSAM Made SAE J1704 or FMVSS No. 116 DOT 4
    except TSAM Made SAE J1703 or FMVSS No. 116 DOT 3