ROOF HEADLINING(for Wagon) DISASSEMBLY

PROCEDURE

1. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (for Push Switch Type)

   Click hereClick here

2. REMOVE VANITY LIGHT ASSEMBLY (w/ Vanity Light)

   Click hereClick here

3. REMOVE NO. 3 ANTENNA CORD SUB-ASSEMBLY

   Click here

4. REMOVE NO. 1 ROOF SILENCER PAD (for Standard Roof)

   1. Remove the 5 No. 1 roof silencer pads.

      

5. REMOVE NO. 2 ROOF SILENCER PAD (for Standard Roof)

   1. 

      Remove the 2 No. 2 roof silencer pads.

6. REMOVE CENTER ROOF HEADLINING PAD (for Standard Roof with Vanity Light)

   1. 

      Remove the 2 center roof headlining pads.

7. REMOVE NO. 1 ROOF WIRE (for Standard Roof)

   1. Remove the adhesive tape from the roof headlining.

      

      *A	w/o Vanity Light	*B	w/ Vanity Light
      *C	for LHD	*D	for RHD
      *E	w/ EC Mirror	*F	w/ Rain Sensor
      *G	w/ Pre-crash Safety System	*H	w/ Pre-Crash Safety City Heater
      	Adhesive Tape	-	-

   2. Remove the No. 1 roof wire from the roof headlining.

8. REMOVE NO. 1 ROOF WIRE (for Glass Roof)

   1. Remove the adhesive tape from the roof headlining.

      

      *A	for LHD	*B	for RHD
      *C	w/ EC Mirror	*D	w/ Rain Sensor
      *E	w/ Pre-crash Safety System	*F	w/ Pre-Crash Safety City Heater
      	Adhesive Tape	-	-

   2. Disengage each clamp to remove the No. 1 roof wire from the roof headlining.