EXHAUST GAS TEMPERATURE SENSOR(w/o Glow Plug Controller) REMOVAL

PROCEDURE

1. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

   Click hereClick hereClick here

2. REMOVE EXHAUST GAS TEMPERATURE SENSOR

   Note:

   If the exhaust gas temperature sensor is dropped, replace it with a new one.

   1. 

      Using a 14 mm union nut wrench, remove the exhaust gas temperature sensor.

3. REMOVE NO. 2 EXHAUST GAS TEMPERATURE SENSOR

   Note:

   If the No. 2 exhaust gas temperature sensor is dropped, replace it with a new one.

   1. 

      Using a 14 mm union nut wrench, remove the No. 2 exhaust gas temperature sensor.