HIGH MOUNTED STOP LIGHT ASSEMBLY REMOVAL


  1. REMOVE BACK DOOR TRIM BOARD ASSEMBLY UPPER (w/o Rear Wiper)


    1. B007SARE01

      Detach the 5 clips and remove the upper back door trim board assembly.

  2. REMOVE BACK DOOR TRIM BOARD ASSEMBLY UPPER (w/ Rear Wiper)


    1. B007TLRE01

      Detach the 6 clips and remove the upper back door trim board assembly.

    2. Remove the remaining clips on the body, and reinstall them to the upper back door trim board assembly.

  3. REMOVE HIGH MOUNTED STOP LIGHT ASSEMBLY


    1. B007W9CE01

      Disconnect the connector.

    2. Using a screwdriver, detach the 8 claws and remove the high mounted stop light assembly.

      Text in Illustration
      *1 Protective Tape

      Tech Tips

      Tape the screwdriver tip before use.

    3. B007SDS

      Remove the gasket from the high mounted stop light assembly.

      Note

      When removing the high mounted stop light assembly, replace the gasket with a new one.