FRONT CRANKSHAFT OIL SEAL INSTALLATION

PROCEDURE


  1. INSTALL TIMING CHAIN COVER OIL SEAL


    1. Apply MP grease to the lip of a new timing chain cover oil seal.

      Note


      • Keep the lip free from foreign matter.

      • Do not allow MP grease to contact the dust seal.

    2. B004EAVC01
      *a -0.75 to -1.45 mm (-0.0295 to -0.0571 in.)

      Using SST and a hammer, tap in the timing chain cover oil seal.

      SST
      09636-20010
      Standard Depth
      -0.75 to -1.45 mm (-0.0295 to -0.0571 in.)

      Note


      • Do not tap in the timing chain cover oil seal at an angle.

      • Keep the lip free from foreign matter.

      • Wipe off any MP grease from the crankshaft.

  2. INSTALL CRANKSHAFT PULLEY ASSEMBLY


    1. Align the crankshaft pulley set crankshaft key with the key groove of the crankshaft pulley assembly.

    2. B004EUHC02
      *a Hold
      *b Turn

      Using SST, hold the crankshaft pulley assembly and install the crankshaft pulley set bolt.

      SST
      09213-54015
      Torque:
      260 N*m  { 2651 kgf*cm, 192 ft.*lbf }

      Tech Tips

      Part number of the installation bolt for SST (crankshaft pulley holding tool): 91551-80650 (quantity: 2)

  3. INSTALL V-RIBBED BELT

    Click here

  4. INSTALL FAN SHROUD

    Click here

  5. INSPECT FOR OIL LEAK

    Click here