NAVIGATION SYSTEM / MULTI INFORMATION SYSTEM

FUNCTION OF MAIN COMPONENTS

Component		Function
Radio and Display Receiver Assembly*1		Receives operation signals from the panel switches and touch-sensitive display panel, which allows flick or drag operation, and data from various components positioned in different parts of the vehicle and sends them to the navigation ECU. Processes navigation information and the operation status from the navigation ECU and displays them on the multi-display. Receives audio signals such as voice guidance from the navigation ECU and sends them to the stereo component amplifier assembly.
Major Components of Radio and Display Receiver Assembly*1	Multi-display Panel	Displays a map screen or an operation screen based on image signals from the navigation ECU. Sends operation signals input via the touch-sensitive display panel to the navigation ECU.
Navigation ECU*1		Houses a navigation computer, gyro sensor and GPS receiver, and processes operation signals or vehicle status signals from the radio and display receiver assembly, controlling the navigation system. Sends image and audio signals, such as navigation information, and the operation status to the radio and display receiver assembly.
Major Components of Navigation ECU*1	Navigation Computer	Corrects the vehicle position based on location information calculated from GPS information, vehicle speed signals, information from the built-in sensors and the shift status. Applies the mark of the calculated vehicle position to the map data and sends the information and operation status to the radio and display receiver assembly. Sends audio signals such as voice guidance provided in accordance with the vehicle position, to the radio and display receiver assembly.
	Gyro Sensor	Detects the vehicle's vertical axis rotation speed (yaw rate and rotation movement) and sends it to the navigation computer.
	GPS Receiver	Demodulates GPS information received by the No. 1 amplifier antenna assembly (navigation antenna), calculates the vehicle position and sends the position signal to the navigation computer.
Navigation Receiver Assembly*2		Receives and processes data from the built-in components, such as the touch-sensitive display panel which allows flick or drag operation, navigation computer, gyro sensor or GPS receiver and various components positioned in different parts of the vehicle, controlling the navigation system and providing various information and the operation status via the multi-display using images, voice and sounds.
Major Components of Navigation Receiver Assembly*2	Multi-display Panel	Displays a map screen or an operation screen based on image signals from the navigation computer. Sends operation signals input via the touch-sensitive display panel to the navigation computer.
	Navigation Computer	Updates the vehicle position based on location information calculated from GPS information, vehicle speed signals, information from the built-in sensors and the shift status. Applies the mark of the calculated vehicle position to the map data in the microSD card (disc player disc) and sends the data to the multi-display. Sends voice guidance audio signals to the speakers. Sends navigation information, such as directions and route guidance, to the combination meter sub-assembly.
	Gyro Sensor	Detects the vehicle's vertical axis rotation speed (yaw rate and rotation movement) and sends it to the navigation computer.
	GPS Receiver	Demodulates GPS information received by the No. 1 amplifier antenna assembly (navigation antenna), calculates the vehicle position and sends the position signal to the navigation computer.
	microSD Card Slot	Interfaces with the microSD card (disc player disc), which contains map data, the navigation system control program, etc.
microSD Card (Disc Player Disc)*2		Contains map data and the navigation system control program, etc.
Parking Brake Switch Assembly		Sends the parking brake position signal to the radio and display receiver assembly1 or navigation receiver assembly2.
Hybrid Vehicle Control ECU		Sends an R shift position signal to the No. 1 integration relay.
No. 1 Integration Relay		Sends an R shift position signal to the radio and display receiver assembly1 or navigation receiver assembly2.
Roof Antenna Pole Sub-assembly AM FM DAB		Receives radio broadcasting signals (AM/FM/DAB).
No. 1 Amplifier Antenna Assembly (Built-in Navigation Antenna)		Amplifies radio broadcasting signals from the radio antenna and sends them to the radio and display receiver assembly1 or navigation receiver assembly2. Receives GPS signals from satellites in orbit around the Earth, at an altitude of approximately 20200 km (12600 miles), and sends them to the navigation ECU1 or navigation receiver assembly2.
Window Glass Antenna Wire FM-sub		Receives radio broadcasting signals (FM-sub).
No. 2 Amplifier Antenna Assembly		Amplifies radio broadcasting signals from the radio antenna and sends them to the radio and display receiver assembly1 or navigation receiver assembly2.
Steering Pad Switch Assembly		Sends operation signals from switches such as the volume switch, mode switch, seek switch and voice switch, to the spiral cable with sensor sub-assembly.
Spiral Cable with Sensor Sub-assembly		Sends operation signals from the steering pad switch assembly to the radio and display receiver assembly1 or navigation receiver assembly2.
Map Light Assembly		Houses the telephone microphone assembly.
Telephone Microphone Assembly		Recognizes speech during voice recognition system operation and sends the audio signal to the radio and display receiver assembly1 or navigation receiver assembly2.
No. 1 Stereo Jack Adapter Assembly		Communicates with the navigation ECU1 or navigation receiver assembly2 via a USB communication line when a USB memory device, portable audio player (USB type) or Apple product is connected.
Combination Meter Sub-assembly		Sends vehicle speed signals to the radio and display receiver assembly1, stereo component amplifier3 or navigation receiver assembly*2. Displays navigation information, such as directions and route guidance, sent from the navigation receiver assembly on the multi-information display.
Stereo Component Amplifier Assembly*3		Amplifies audio signals sent from the radio and display receiver assembly and sends them to the speakers.

*1: Models for Europe
*2: Models for Australia
*3: Models with 8-speaker system

FUNCTION

Navigation Screen

The navigation computer calculates the present position and direction of travel, then determines a route and calculates the driving distance based on the following information sources:
- - Map data in the navigation ECU (Models for Europe)
- - Map data in the microSD card (disc player disc) (Models for Australia)
- - Global Positioning System (GPS) satellites
- - Built-in gyro sensor
- - Vehicle speed signal
- - Reverse signal
- - Parking brake signal
- - Radio Data System Traffic Message Channel (RDS-TMC) signal

The functions of the navigation screen are listed below.

Models for Europe
Item		Function
Map Display	Map Scroll	Scroll operation on the map screen can be selected in the following 2 ways: Flick/drag scrolling: Flick or drag in the direction that brings your desired location closer to the center of the map screen. Point scrolling: Enables scrolling by connecting the touch points on the map screen.
	Taillight-interlocked Map Color Change	Changes the color of the map screen that is displayed when the taillights are turned on.
	North Up/Heading Up	If North Up is selected, regardless of the direction of vehicle travel, north is always up. If Heading Up is selected, the direction of vehicle travel is always up.
	3D Display	Displays a 3-dimensional (3D) view of the map.
	3D Icon Display	In some areas during the 3D display, buildings and landmarks are displayed using real image icons.
	Multi-step Scale Display	Changes the map scale in 14 steps.
	Split-view Display	Displays different screens on a screen that is split into 2 views.
	Street Name Indication on Scrolled Map	Displays the street name and city name even when the map screen is being scrolled.
	Road Number Sign Board Display	Displays the road number on the map.
	Point of Interest Display	Displays selected types of points of interest as marks on the map.
	Route Guidance Demonstration	Demonstrates the route guidance to the destination.
	Current Position Display Function	Displays the latitude, longitude and altitude of the current position based on the GPS signals being received.
	Speed Limit Display	Displays the speed limit of the road currently being traveled on.
	Safety Camera Display	Displays safety camera icons on the map.
	Traffic Bar	A traffic message icon and traffic congestion information are displayed based on traffic information received via the internet.
	RDS-TMC Display	Displays RDS-TMC icons, arrows and indicators when RDS-TMC service is being received.
	Side Screen Menu Bar	Shortcut menu icons are displayed on the right side of the screen and allow the driver to use each function quickly.
	Traffic Information Display	Displays TMC icons, arrows and indicators when TMC service is being received.
Destination Search	Preset Destination Memory Search	Sets a pre-registered point as a destination point while driving.
	Address Search	A destination can be set by entering a country, and town name/code name, and street/intersection name.
	Point of Interest Search	A destination can be set in 2 ways: The name of a POI can be entered and then searched for after selecting a search area. Search areas include defined areas (such as a user selected country, state and city), near the current position, near the main destination, or along the current route). A POI category can be selected and searched for near the current position, in a defined area (such as a user selected country, state and city), near the main destination, or along the current route.
	Application Search	Locations searched via applications such as Fuel, Parking or Street View can be set as a destination.
	Previous Destination Search	A destination can be set using the destination list in which previously set destinations are stored.
	Map Search	A destination can be set by using the cursor on the map screen.
	Coordinate Search	A destination can be input by entering its coordinates.
Route Search	Multiple Destination Setting	Sets multiple destinations. Can also rearrange sequence of the destinations.
	Multiple Route Search	Searches for multiple routes.
	Search Condition Designation	Searches for fast, short, and ecological routes.
	Detour Search	Changes the route to detour around a section of the route.
	Regulated Road Consideration	Performs searches which consider regulated roads.
	Avoid Traffic Search	Manually changes to another route to avoid heavy congestion.
	Automatic Navigation	The driver can set favorite destinations and day and/or hour information for each destination. Next time the driver starts the vehicle in the specific time slot, the system suggests a destination to the driver or sets a destination automatically.
Guidance	Voice Guidance	Provides voice guidance about the distance and the direction of travel to a destination point based on road conditions and vehicle speed.
	Next Turn Guidance	Next Turn Guidance Provides guidance about the distance to the next turn and indicates the direction of the turn using an arrow.
	Motorway (Highway) Exit or Junction Display	When the vehicle approaches an exit or junction, the motorway guidance screen will be displayed.
	Lane Recommendation Display	When the vehicle approaches a maneuver point, the lane recommendation will be displayed.
	Turn List Display	Displays a turn list on the right side of the 2-screen display.
	Distance-to-destination Display	Displays the distance from the present location to the destination.
	Estimated Arrival Time Display	Displays estimated arrival time.
Others	Voice Recognition*	Recognizes pre-programmed system commands spoken to operate the navigation system.

*: Models with navigation ECU (premium model)

Models for Australia
Item		Function
Map Display	Taillight-interlocked Map Color Change	Changes the color of the map screen that is displayed when the taillights are turned on.
	North Up/Heading Up	If North Up is selected, regardless of the direction of vehicle travel, north is always up. If Heading Up is selected, the direction of vehicle travel is always up.
	3D Display	Displays a 3-dimensional (3D) view of the map.
	Map Scale Display	Allows the map scale to be adjusted.
	Footprint Map	Displays a major city in a scale of 75 m (246 ft.).
	Point of Interest Display	Displays selected types of points of interest as marks on the map.
	Multiple Display Function	Displays different mode screens on a screen that is split into 3 views or 2 views.
	Current Position Display Function	Displays the latitude, longitude and altitude of the current position based on the GPS signals being received.
	Route Guidance Demonstration	Demonstrates the route guidance to the destination.
	Route Trace	By saving a traveled route automatically or saving it manually upon reaching the destination, the routes can be displayed and retraced.
	RDS-TMC Display	Displays RDS-TMC icons, arrows, popup messages and indicators when RDS-TMC service is being received.
Destination Search	Preset Destination Memory Search	Sets a pre-registered point as a destination point while driving.
	Address Search	A destination can be set by entering a country or state name, town/suburb name, street and house number.
	Point of Interest Search	A destination can be set in 4 ways: Quick search Preset search Category search Name search
	Previous Destination Search	A destination can be set using the destination list in which previously set destinations are stored.
	Map Search	A destination can be set by using the cursor on the map screen.
Route Search	Multiple Route Search	Searches for multiple routes.
	Search Condition Designation	Searches for quick, short, and alternate routes. Sets whether the following routes should be avoided during route search: Highways Toll Roads Ferries Unsealed Roads 4WD Tracks
	Adds Waypoints	Adds waypoints along with the set route to set the pass points.
	Traffic Congestion Information Consideration	Performs searches which consider traffic congestion information.
	Auto Avoid Traffic Search	Automatically changes to route to avoid heavy congestion.
	Auto Re-route Search	Performs automatic re-route search if the vehicle deviates from the set route.
Guidance	Voice Guidance	Provides voice guidance about the distance and the direction of travel to a destination point based on road conditions and vehicle speed.
	Next Turn Guidance	Provides guidance about the distance to the next turn and indicates the direction of the turn using an arrow.
	Lane Information Guidance	Provides lane information and indicates the lane to be driven in when the vehicle is on a multiple lane road.
	Signposts Display	Displays lane information similar to overhead road traffic signs on the top of the map screen.
	Real Highway/Motorway Junction Display	Displays the junction and signage in 3D in the vicinity of a major junction while driving.
	Route Status Information Display	Displays route items that the driver selects to display, such as the current vehicle speed or altitude, in the data fields at the corner of the map screen. Route data related to the destination or following way points also can be displayed.
	Route Progress Bar Display	Displays the progress made on the current route using the route progress bar to the left of the map screen.
Others	Voice Recognition	Recognizes pre-programmed system commands spoken to operate the navigation system.

Setup Screen

The settings for the functions of the multi-display are available from the setup screen. The settings for the functions of the multi-display are available from the setup screen.

Models for Europe
Item	Function
General Setting	The language can be selected. The voice guidance volume, phone voice volume, ring volume and voice recognition dialog volume*1 can be adjusted or switched off. The unit of measurement for fuel consumption can be changed. The beep sound can be turned off. Automatic text scrolling can be turned off. The capacitive touch button sensor sensitivity can be changed. Data can be stored on a USB memory device. Data can be copied from a USB memory device. Registered information (personal data) can be cleared. System information Third party software information used in the multimedia system, such as notices, can be displayed.
Display Settings	Day mode can be set (the screen remains in day mode regardless of the position of the headlight switch). The screen can be turned off. The Map Menu, Camera and Video screen can be adjusted.
Audio Settings	Sound quality can be adjusted. The level of the ASL (Automatic Sound Levelizer) can be adjusted. The ASL (Automatic Sound Levelizer) can be turned on/off. Surround sound can be turned on/off.*2
Connectivity Settings	Bluetooth system settings can be changed: The Bluetooth function can be turned on/off Connectable Bluetooth devices can be search The names of the Bluetooth devices that are currently connected or that are in the connection history can be displayed in a list. Additionally, availability information for each Bluetooth device is displayed. Cost warnings function and roaming warning function on/off setting Change of the system name and PIN code used for certification while connecting via Bluetooth Wi-Fi communication function settings can be displayed or changed:*1 The Wi-Fi communication function can be turned on/off Display a list of available Wi-Fi networks and change the connection priority Automatic connection to Wi-Fi networks on/off setting Confirmation of connection to a Wi-Fi network message on/off setting A profile for connecting to the internet can be set. The navigation ECU can be set to automatically connect to the Internet.
Map Settings	The map display mode can be changed. The brightness of the map screen can be changed. The layout of split view can be changed. The display of arrival information can be changed. Display of the speed limit information can be set to on or off. The automatic zoom level can be changed. POI icons to be displayed can be changed. Display of the route guidance arrow can be set to on or off. Display of the name of the current street or the next street can be set to on or off. Display of the names of the buildings for the 3D heading-up map can be set to on or off.1 Display of the landmarks for the 3D heading-up map can be set to on or off.1 Display of the road signs can be set to on or off. Display of the junction view can be set to on or off. Display of the recommended lane can be set to on or off. Display of the traffic bar can be set to on or off. Display of the traffic message icons can be set to on or off. Display of the safety cameras icons can be set to on or off. Display of the safety camera icons based on online data can be set to on or off.
Navigation Settings	The following route preferences can be changed. Recommended route type Traffic information history is included in route calculation. 3 routes (fastest, shortest and ecological) are displayed on the map screen during route calculation. Automatically calculates the route back to the starting point after the set destination has been reached. Sets the pronunciation of street names in navigation announcements to on or off.*1 Avoidance criteria during route calculation can be set. Automatic display of country information when a border is crossed can be set to on or off.
Traffic Settings	The following can be set when receiving traffic messages via the Internet. The refresh frequency while inside the border of the country can be set. Sender of traffic messages while outside the border of the country can be set. The following can be set when receiving traffic messages via FM radio broadcast. The selection of FM radio station from which the vehicle receive traffic messages can be set from automatic or manual. The reception of traffic messages can be set to off. The radius in which traffic messages are displayed can be changed. Dynamic reroute method can be changed.
Toyota Online Settings	The following detailed Toyota web account settings can be changed: Creating a new account Setting of changing an existing account Reception settings of remotely customized vehicle settings data from Toyota portal site Upload settings of remotely customized vehicle settings data to Toyota portal site Setting to add POIs and routes by downloading them from the Toyota portal site and store them in the favourites list. Setting to automatically download POIs and routes from the Toyota portal site and store them in the favourites list. Applications downloaded to the navigation system are displayed as a list. Information of each application can be displayed or applications can be deleted. Applications can be set to start automatically when the navigation system is turned on. Applications can be displayed on the split view of the map screen.
Phone Settings	Message reception notification can be turned on or off. E-mail reception notification can be turned on or off. The ring tone can be changed or turned off. The contacts of a Phonebook can be sorted. Phone book data stored on a cellular phone can be transferred manually.
Vehicle Settings	Customizable vehicle settings can be changed.
Get Started Settings	Tips for the navigation system are available on the Internet by accessing web pages through the QR code or selecting the URL.

*1: Models with multimedia system with navigation ECU (premium model)
*2: Models with 8-speaker system

Models for Australia
Item	Function
General Settings	Time zones, the on/off setting of daylight saving time can be changed. The unit of measurement for fuel consumption can be changed. The beep sound can be turned off. The color of the screen buttons can be changed. Keyboard layout can be changed. Automatic return from the audio screen to the home screen after audio operation can be changed. Animations can be set to on/off. The opening image can be changed. The screen off image can be changed. Registered information (personal data) can be cleared. The navigation system program can be updated. Third party software information used in the navigation system, such as notices, can be displayed.
Home Screen Settings	The display items/area on the home screen can be changed.
Voice Settings	The voice guidance volume can be adjusted or switched off. Voice guidance during route guidance can be set. Voice recognition prompts can be set. Voice recognition prompt interruption can be set to on/off.
Display Settings	Map Menu, Camera and Video screen can be adjusted.
Bluetooth Settings	Bluetooth devices can be registered. Bluetooth devices can be deleted. Bluetooth devices can be selected. Bluetooth devices can be edited. Bluetooth system settings can be changed: Automatic connection to a Bluetooth device Bluetooth device name Bluetooth device PIN-code Bluetooth device address Display of Bluetooth device connection status Bluetooth device profile
Telephone/Message Settings	A Bluetooth phone can be registered or connected. Telephone sound settings can be changed: Ring Tone Ring Tone Volume Message Readout volume SMS/MMS Incoming Tone SMS/MMS Incoming Tone Volume E-mail Incoming Tone E-mail Incoming Tone Volume In-call Volume Contact/Call history settings can be changed: Automatic contact/history transfer function settings when a PBAP compatible Bluetooth phone is connected Contacts update Contacts sorting Favorites list registration Contacts deletion from the favorites list Contact image display Call history deletion* New contact addition to the contact list* Contact list editing* Contact deletion from the contact list* Message function settings can be changed: Message forwarding from cellular phones Automatic message readout SMS/MMS notification popup E-mail notification popup Vehicle signature on outgoing messages Message read status on phone update Incoming SMS/MMS display when an SMS/MMS message is received "Full Screen": The incoming SMS/MMS display screen is displayed and can be operated on the screen. "Drop-Down": A message is displayed on the upper side of the screen and can be operated only via the steering wheel switches. Incoming E-mail display when an E-mail is received "Full Screen": The incoming E-mail display screen is displayed and can be operated on the screen. "Drop-Down": A message is displayed on the upper side of the screen and can be operated only via the steering wheel switches. Display of messaging account names on the inbox tab Telephone display settings can be changed: Incoming call display Display of the automatic contact/history transfer completion message
Audio Settings	FM radio settings can be changed: Radio text display on/off settings DAB radio settings iPod settings External video settings Cover art settings can be changed.
Toyota Link	The voice guidance volume can be adjusted or switched off. The pop up reminder for cellular phone data usage can be set.
Vehicle	Customizable vehicle settings can be changed.
Screen Off	The screen can be turned off.

*: PBAP non-compatible phone, or PBAP compatible phone with the automatic telephone number transfer function set to off

Fuel Consumption Screen

The fuel consumption screen is displayed as illustrated below. This screen has the display functions listed below.

Models with Multimedia System with Navigation ECU


*a	The illustrations shown are examples only. The illustrations may differ from the actual vehicle screens.

Item		Outline
(1)	Average Speed	Displays an average speed value that has been calculated by the combination meter sub-assembly, which is based on the distance driven and time elapsed since the power switch is turned on (IG).
(2)	Cruising Range	Displays the approximate drivable distance.
(3)	Trip Information Switch	Changes the screen to the fuel consumption average per minute screen.
(4)	Past Record Switch	Changes the screen to the fuel consumption Past Record (per trip) screen.
(5)	Energy Switch	Changes the screen to the energy monitor screen.
(6)	Average Fuel Consumption Per Minute	Displays the value that has been calculated by the combination meter sub-assembly, which is based on the driven distance and the volume of fuel consumed (fuel injection signal), since the power switch was turned on (IG). Displays the average fuel consumption for the last minute, or since clear was last selected.
(7)	Recovered Energy	Indicates the recovered energy for 1 minute with "E" symbols. The recovered energy status is calculated by the hybrid vehicle control ECU.
(8)	Elapsed Time	Displays the value that has been calculated by the combination meter sub-assembly, which is based on the time elapsed since the power switch is turned on (IG).
(9)	Clear Switch	Clears all past information.
(10)	Current Fuel Consumption	Displays the instantaneous (current) fuel consumption value that has been calculated by the combination meter sub-assembly, which is based on the driven distance and the volume of fuel consumed (fuel injection signal), since the power switch was turned on (IG).
(11)	Best Fuel Consumption	Displays the best (most economical) per trip fuel consumption.
(12)	Average Fuel Consumption Per Trip	Displays the current record and the last 5 average per trip fuel consumption records or the current record and those since clear was last selected. Starts calculating the average fuel consumption when the average fuel consumption displayed on the combination meter sub-assembly is reset.
(13)	Update Switch	Resets the average fuel consumption to measure the current fuel consumption again. Sends the average fuel consumption reset signal to the combination meter sub-assembly to update the graph.
(14)	Energy Monitor	Indicates the energy transmission direction, making it possible to confirm the current drive method (engine, motor or both), the power generation status by the engine and status of regenerative energy use. The State Of Charge (SOC) of the battery can be checked on the meter. The meter shows the SOC in 8 levels. Displays the energy monitor status that has been calculated by the hybrid vehicle control ECU.

Models with Navigation System


*a	The illustrations shown are examples only. The illustrations may differ from the actual vehicle screens.

Item		Outline
(1)	Clear Switch	Clears all past information.
(2)	Average Speed	Displays an average speed value that has been calculated by the combination meter sub-assembly, which is based on the distance driven and time elapsed since the power switch is turned on (IG).
(3)	Elapsed Time	Displays the value that has been calculated by the combination meter sub-assembly, which is based on the time elapsed since the power switch is turned on (IG).
(4)	Cruising Range	Displays the approximate drivable distance.
(5)	Past Record Switch	Changes the screen to the fuel consumption Past Record (per trip) screen.
(6)	Energy Switch	Changes the screen to the energy monitor screen.
(7)	Average Fuel Consumption Per Minute	Displays the value that has been calculated by the combination meter sub-assembly, which is based on the driven distance and the volume of fuel consumed (fuel injection signal), since the power switch was turned on (IG). Displays the average fuel consumption for the last minute, or since clear was last selected.
(8)	Recovered Energy	Indicates the recovered energy for 1 minute with "E" symbols. The recovered energy status is calculated by the hybrid vehicle control ECU.
(9)	Current Fuel Consumption	Displays the instantaneous (current) fuel consumption value that has been calculated by the combination meter sub-assembly, which is based on the driven distance and the volume of fuel consumed (fuel injection signal), since the power switch was turned on (IG).
(10)	Best Fuel Consumption	Displays the best (most economical) per trip fuel consumption.
(11)	Average Fuel Consumption	Displays the average fuel consumption for this trip and the previous 5 trips.
(12)	Trip Information Switch	Changes the screen to the fuel consumption average per minute screen.
(13)	Average Fuel Consumption Per Trip	Displays the current record and the last 5 average per trip fuel consumption records or the current record and those since clear was last selected. Starts calculating the average fuel consumption when the average fuel consumption displayed on the combination meter sub-assembly is reset.
(14)	Update Switch	Resets the average fuel consumption to measure the current fuel consumption again. Sends the average fuel consumption reset signal to the combination meter sub-assembly to update the graph.
(15)	Energy Monitor	Indicates the energy transmission direction, making it possible to confirm the current drive method (engine, motor or both), the power generation status by the engine and status of regenerative energy use. The State Of Charge (SOC) of the battery can be checked on the meter. The meter shows the SOC in 8 levels. Displays the energy monitor status that has been calculated by the hybrid vehicle control ECU.

DIAGNOSIS
1. For details on the procedure required to enter the Service Menu screen, refer to the Repair Manual.