RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT COOLING FAN RELAY (FAN NO. 1)


    1. A01HFRXN10

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
      Battery voltage applied to terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the cooling fan relay.

  2. INSPECT NO. 2 COOLING FAN RELAY (FAN NO. 2)


    1. A01HFRXN10

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
      Battery voltage applied to terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the No. 2 cooling fan relay.