REAR LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. REMOVE CENTER BACK DOOR GARNISH

    Click here

  2. REMOVE BACK DOOR SIDE GARNISH LH

    Click here

  3. REMOVE BACK DOOR SIDE GARNISH RH

    Click here

  4. REMOVE BACK DOOR TRIM BOARD ASSEMBLY

    Click here

  5. REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)

    Click here

  6. REMOVE REAR LIGHT ASSEMBLY LH

    1. E332627C01
      V100155

      Protective Tape

      Put protective tape around the rear light assembly LH.

    2. E341512

      Disconnect the connector.

    3. E332628

      Pull the rear light assembly LH towards the rear of the vehicle to remove it.

      Note:

      If the rear light assembly LH is removed, replace the rear light gasket LH with a new one.