BLACK OUT TAPE(for Rear Door) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Click here.

  2. REMOVE DECK BOARD ASSEMBLY

    Click here

  3. REMOVE NO. 1 DECK BOARD

    Click here

  4. REMOVE NO. 2 DECK BOARD

    Click here

  5. REMOVE REAR DECK FLOOR BOX

    Click here

  6. REMOVE DECK FLOOR BOX RH

    Click here

  7. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG

    Click here

  9. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL

    Click here

  10. REMOVE REAR DOOR ARMREST COVER

    Click here

  11. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  12. REMOVE REAR DOOR TRIM BRACKET

    Click here

  13. REMOVE REAR DOOR SERVICE HOLE COVER

    Click here

  14. REMOVE REAR DOOR GLASS RUN

    Click here

  15. REMOVE REAR DOOR WINDOW GUIDE SUB-ASSEMBLY

    Click here

  16. REMOVE REAR DOOR REAR GUIDE SEAL

    Click here

  17. REMOVE REAR DOOR GLASS SUB-ASSEMBLY

    Click here

  18. REMOVE REAR DOOR BELT MOULDING ASSEMBLY

    Click here

  19. REMOVE REAR DOOR FRONT WINDOW FRAME MOULDING

    Click here

  20. REMOVE REAR DOOR FRAME GARNISH (w/o Rear Door Sunshade)

    Click here

  21. REMOVE REAR NO. 2 DOOR FRAME GARNISH (w/o Rear Door Sunshade)

    Click here

  22. REMOVE REAR DOOR FRAME GARNISH (w/ Rear Door Sunshade)

    Click here

  23. REMOVE REAR NO. 2 DOOR FRAME GARNISH (w/ Rear Door Sunshade)

    Click here

  24. DISCONNECT REAR DOOR WEATHERSTRIP


    1. A005DWF

      Using a clip remover, disengage the clip and remove the upper part of the rear door weatherstrip to the extent that allows removal of the rear door strip and black out tape.

  25. REMOVE NO. 2 BLACK OUT TAPE


    1. Using a heat light, heat the No. 2 black out tape and vehicle body.

      Heating Temperature
      Item Temperature
      Vehicle Body 40 to 60°C (104 to 140°F)

      Note

      Do not heat the vehicle body excessively.

    2. A005BGO

      Pull back on one of the ends of the No. 2 black out tape to remove it.

      Tech Tips

      When pulling on the tape, pull it parallel to the body.

  26. REMOVE REAR DOOR OUTSIDE STRIPE


    1. Using a heat light, heat the rear door outside stripe and vehicle body.

      Heating Temperature
      Item Temperature
      Vehicle Body 40 to 60°C (104 to 140°F)

      Note

      Do not heat the vehicle body excessively.

    2. A0059SM

      Pull back on one of the ends of the rear door outside stripe to remove it.

      Tech Tips

      When pulling on the stripe, pull it parallel to the body.

  27. REMOVE REAR DOOR UPPER OUTSIDE STRIPE


    1. Using a heat light, heat the rear door upper outside stripe and vehicle body.

      Heating Temperature
      Item Temperature
      Vehicle Body 40 to 60°C (104 to 140°F)

      Note

      Do not heat the vehicle body excessively.

    2. A005DKZ

      Pull back on one of the ends of the rear door upper outside stripe to remove it.

      Tech Tips

      When pulling on the stripe, pull it parallel to the body.

  28. REMOVE REAR DOOR LOWER OUTSIDE STRIPE


    1. Using a heat light, heat the rear door lower outside stripe and vehicle body.

      Heating Temperature
      Item Temperature
      Vehicle Body 40 to 60°C (104 to 140°F)

      Note

      Do not heat the vehicle body excessively.

    2. A005A84

      Pull back on one of the ends of the rear door lower outside stripe to remove it.

      Tech Tips

      When pulling on the stripe, pull it parallel to the body.