IGNITION SWITCH REMOVAL

PROCEDURE

  1. PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).

  2. DISCONNECT BATTERY NEGATIVE TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  3. REMOVE LOWER STEERING COLUMN COVER

    1. A208849

      Detach the 4 claws, release the tilt lever and remove the lower steering column cover.

  4. REMOVE IGNITION SWITCH ASSEMBLY

    1. A208847

      Disconnect the ignition switch connector.

    2. A208848

      Remove the 2 screws and ignition switch.