ROOF SUNSHADE SYSTEM

DTC Code DTC Name
HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tip:

  • Use these procedures to troubleshoot the roof sunshade system.

  • *: Use the intelligent tester.

PROCEDURE

  1. VEHICLE BROUGHT TO WORKSHOP

    Result

    Proceed to

    NEXT
    NEXT

  2. INSPECT BATTERY VOLTAGE

    Standard voltage

    11 to 14 V

    If the voltage is below 11 V, recharge or replace the battery before proceeding.

    Result

    Proceed to

    NEXT
    NEXT

  3. CHECK LIN COMMUNICATION SYSTEM*

    1. Using the intelligent tester, check if the LIN communication system is functioning normally.

    Result

    Result

    Proceed to

    LIN communication system DTC is not output

    A

    LIN communication system DTC is output

    B
    B

    Go to LIN COMMUNICATION SYSTEM

    Click here

    A

  4. PROBLEM SYMPTOMS TABLE

    1. Refer to the problem symptoms table.

      Click here

    Result

    Result

    Proceed to

    Fault is not listed in problem symptoms table

    A

    Fault is listed in problem symptoms table

    B
    B

    ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH PROBLEM SYMPTOMS TABLE

    A

  5. OVERALL ANALYSIS AND TROUBLESHOOTING*

    1. Operation Check.

      Click here

    2. Terminals of ECU.

      Click here

    3. Data List / Active Test.

      Click here

    Result

    Proceed to

    NEXT
    NEXT

  6. ADJUST, REPAIR OR REPLACE

    Result

    Proceed to

    NEXT
    NEXT

  7. INITIALIZATION

    1. Initialization.

      Click here

    Result

    Proceed to

    NEXT
    NEXT

  8. CONFIRMATION TEST

    Result

    Proceed to

    NEXT
    NEXT

    END