DRIVE BELT INSTALLATION

PROCEDURE

  1. INSTALL V-RIBBED BELT

    1. A249313C01

      *A

      w/o Air Conditioning System

      *B

      w/ Air Conditioning System

      Install the V-ribbed belt.

    2. If it is difficult to install the V-ribbed belt, perform the following procedure:

      1. Install the V-ribbed belt on every pulley except the tensioner pulley as shown in the illustration.

      2. Release the V-ribbed belt tension by turning the V-ribbed belt tensioner assembly counterclockwise, and install the V-ribbed belt on the tensioner pulley.

        Note:

        • Install the backside of the V-ribbed belt on the V-ribbed belt tensioner pulley.

        • Check that the V-ribbed belt is properly installed to each pulley.

    3. A249314

      Turn the V-ribbed belt tensioner assembly counterclockwise and remove the 5 mm hexagon wrench.

    4. After installing the V-ribbed belt, check that it fits properly in the ribbed grooves. Confirm that the belt has not slipped out of the grooves on the bottom of the crank pulley by hand.

  2. INSTALL NO. 1 ENGINE COVER

    Click hereClick hereClick hereClick here