AUDIO AND VISUAL SYSTEM(for Radio and Display Type) CD Sound Skips

PROCEDURE

1. CHECK CD

   1. 

      Check that the CD is not deformed or cracked.

   Result

   Proceed to
   No deformation or cracks on the CD
   Deformation or cracks on the CD

   Deformation or cracks on the CD

   END (CD IS DEFECTIVE)

   No deformation or cracks on the CD

2. CHECK CD

   1. 

      Check the CD.

      Note:

      Do not use a conventional record cleaner or antistatic preservative.

      Tip:

      If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

   Result

   Proceed to
   The CD is clean
   The CD is not clean

   The CD is not clean

   END (CD IS DEFECTIVE)

   The CD is clean

3. CHECK CD

   1. Replace the CD with a known good one and check that the malfunction disappears.

   Result

   Proceed to
   Malfunction disappears
   Malfunction appears

   Malfunction disappears

   END (CD IS DEFECTIVE)

   Malfunction appears

4. CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY

   1. Check the radio and display receiver assembly installation condition.

      1. Check that the radio and display receiver assembly is properly installed.

         OK

         The radio and display receiver assembly is properly installed.

   Result

   Proceed to
   OK
   NG

   OK

   REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

   Click hereClick hereClick here

   NG

   REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY PROPERLY