SOLAR SENSOR REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE

  1. PRECAUTION

    Note:

    After turning the power switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click hereClick hereClick hereClick here

  2. REMOVE DECK BOARD ASSEMBLY

    Click here

  3. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick hereClick here

  4. REMOVE UPPER INSTRUMENT PANEL ASSEMBLY

    Click here

  5. REMOVE AUTOMATIC LIGHT CONTROL SENSOR (SOLAR SENSOR)

    1. E269040

      Disconnect the connector.

    2. Detach the 2 claws and remove the automatic light control sensor (solar sensor).