POWER SEAT SWITCH(for Rear Seat) REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE CONSOLE ARMREST ASSEMBLY (for Front Side)

   Click here

2. REMOVE UPPER REAR CONSOLE PANEL (for Front Side)

   Click here

3. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH (for Front Side)

   Click here

4. REMOVE DOOR SCUFF PLATE ASSEMBLY LH (for Front Side)

   Click here

5. REMOVE COWL SIDE TRIM BOARD LH (for Front Side)

   Click here

6. REMOVE INSTRUMENT SIDE PANEL LH (for Front Side)

   Click here

7. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY (for Front Side)

   Click here

8. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for Front Side)

   Click here

9. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL (for Front Side)

   Click here

10. REMOVE NO. 1 FOLD SEAT SWITCH ASSEMBLY (for Front Side)

    
    

    1. 

       Detach the 4 claws to remove the No. 1 fold seat switch assembly.

11. REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY (for Rear Seat)

    Click here

12. REMOVE NO. 3 BATTERY SERVICE COVER BOARD (for Rear Seat)

    Click here

13. REMOVE NO. 2 BATTERY SERVICE COVER BOARD (for Rear Seat)

    Click here

14. REMOVE REAR POWER SEAT SWITCH (for Rear Seat)

    Tech Tips

    Use the same procedure for both rear power seat switches.

    
    

    1. 

       Detach the 2 claws to remove the rear power seat switch.

15. REMOVE NO. 2 FOLD SEAT SWITCH ASSEMBLY (for Rear Side)

    
    

    1. 

       *1	Protective Tape

       Using a screwdriver, detach the 2 claws.

       Tech Tips

       Tape the screwdriver tip before use.

    2. 

       Disconnect the connector to remove the No. 2 fold seat switch assembly.