PARKING ASSIST ECU INSTALLATION

PROCEDURE

  1. INSTALL PARKING ASSIST ECU

    1. B421046

      Temporarily install nut (A) so that the nut cannot fall, but do not tighten it.

    2. Connect the 2 connectors.

    3. B421044

      Insert nut (A) into the hole in the body and slide downward to temporarily install the parking assist ECU.

    4. Temporarily install the 2 nuts.

    5. Install the parking assist ECU with the 3 nuts.

      Tip:

      Tighten the nuts in the order shown in the illustration.

      5.5 N*m

      56 kgf*cm

      49 in.*lbf

  2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

    Click here

  3. INSTALL DECK TRIM SERVICE HOLE COVER

    Click here

  4. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tip:

    Use the same procedure described for the LH side.

    Click here

  5. INSTALL REAR DOOR SCUFF PLATE RH

    Tip:

    Use the same procedure described for the LH side.

    Click here

  6. INSTALL REAR SEAT ASSEMBLY (for RH Side)

    Click here

  7. INSTALL REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE

    Click here

  8. INSTALL REAR DECK TRIM COVER (for Full Size Spare Tire)

    Click here

  9. INSTALL REAR FLOOR FINISH PLATE (w/o Spare Tire, for Compact Spare Tire)

    Click here

  10. INSTALL REAR NO. 2 FLOOR BOARD

    Tip:

    Use the same procedure described for the No. 3 rear floor board side.

    Click here

  11. INSTALL DECK BOARD ASSEMBLY

    Click here

  12. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  13. INSTALL PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/ Partition Net)

    Click here