FUEL SENDER GAUGE ASSEMBLY INSPECTION

PROCEDURE

  1. INSPECT FUEL SENDER GAUGE ASSEMBLY

    1. Check that the float moves smoothly between F and E.

    2. A389900C01

      *a

      Component without harness connected

      (Fuel Sender Gauge Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Float Level

      Specified Condition

      1 - 2

      F

      13.5 to 16.5 Ω

      Between F and E

      13.5 to 414.5 Ω (Gradually changes)

      E

      405.5 to 414.5 Ω

      If the result is not as specified, replace the fuel sender gauge assembly.