EXTENSION HOUSING REAR OIL SEAL REPLACEMENT


  1. REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY

    Click here

  2. REMOVE AUTOMATIC TRANSMISSION EXTENSION HOUSING OIL SEAL


    1. B007QIWE03

      Using SST, remove the automatic transmission extension housing oil seal.

      SST
      09308-00010

  3. INSTALL AUTOMATIC TRANSMISSION EXTENSION HOUSING OIL SEAL


    1. Coat the lip of a new automatic transmission extension housing oil seal with MP grease.

    2. B007V4JE01

      Using SST and a hammer, drive in the automatic transmission extension housing oil seal.

      SST
      09309-37010
      Standard depth
      5.4 to 5.8 mm (0.213 to 0.228 in.)

      Note


      • Keep the lip free of foreign matter.

      • Do not tap the automatic transmission extension housing oil seal at an angle.

  4. INSTALL PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY

    Click here